Jackery Explorer 1000: Runtime & Specs
The Jackery Explorer 1000 is a 1,002 Wh NMC lithium-ion power station with 1,000 W of continuous AC output and a 2,000 W surge rating. It runs a typical full-size fridge for about 15 hours. It has been replaced or discontinued, but many are still in use.
We may earn a commission if you buy through these links. It never changes our numbers, and every model in our database is included whether or not it pays us. Learn more.
How long will the Explorer 1000 run your appliances?
Nonstop runtime for one device at a time, using typical US wattages and 85% inverter efficiency. Devices marked ✕ can't run on this model.
| Device | Avg draw | Runtime | Bar |
|---|---|---|---|
| LED light bulb | 9 W | 3.9 days | |
| Phone charging | 10 W | 3.8 days | |
| Wi-Fi router + modem | 15 W | 2.4 days | |
| Laptop | 50 W | 17 hours | |
| CPAP + humidifier | 30 W | 28 hours | |
| CPAP with heated humidifier + humidifier | 60 W | 14 hours | |
| Starlink Standard | 90 W | 9.5 hours | |
| TV | 100 W | 8.5 hours | |
| Mini fridge | 29 W | 29 hours | |
| Refrigerator | 58 W | 15 hours | |
| Chest freezer | 29 W | 29 hours | |
| Sump pump (1/3 HP) | 160 W | 5.3 hours | |
| Sump pump (1/2 HP) | 210 W | Too much power | |
| Window AC | 225 W | 3.8 hours | |
| Drip coffee maker | 1,000 W | 51 min | |
| Microwave | 1,500 W | Too much power | |
| Space heater | 750 W | Too much power | |
| Well pump | 33 W | Needs 240 V |
Fridges, freezers, pumps and AC units cycle on and off, so we use their average draw. Want a mix of devices on a schedule? Use the runtime calculator.
What the Explorer 1000 can't power
- Microwave (1,000 W cooking power): needs 1,500 W running
- Electric kettle (1.7 L): needs 1,500 W running
- Induction burner (single, portable): needs 1,500 W running
- Space heater (portable, 1,500 W): needs 1,500 W running
- Sump pump (1/2 HP): needs 1,050 W running
- Well pump (1/2 HP submersible): needs 240 V
- Circular saw (7-1/4 in.): needs 1,400 W running
- EV Level 1 charging (120 V, 12 A): needs 1,440 W running
Solar charging time
Hours of good sun to charge from empty, assuming panels deliver 75% of their rating.
| Panels | Power in | Hours of sun |
|---|---|---|
| 100 W of panels | 75 W | 13 hours |
| 126 W of panels | 95 W | 11 hours |
Check panel voltage and wiring with the solar charging calculator.
Full specifications
| Battery capacity | 1,002 Wh |
|---|---|
| Battery chemistry | Lithium-ion (NMC) |
| Continuous AC output | 1,000 W |
| Surge (peak) output | 2,000 W |
| Boost mode | None listed |
| AC voltage | 120V |
| AC outlets | 3 |
| USB-C ports | 2 (up to 18 W) |
| USB-A ports | 2 |
| 12 V car outlet | Yes |
| Max solar input | 126 W |
| Solar voltage range | 12–30 V |
| Solar max current | 8.3 A |
| Max AC charging power | 180 W |
| AC charging time (maker claim) | ~7 hr (AC adapter) |
| Expandable | No |
| UPS / EPS switchover | Not listed |
| Cycle life | 500 cycles (to 70%) |
| Weight | 22 lb |
| Warranty | 3 years |
Notes: NMC; AC rated 110V. FAQ lists 500 cycles (no %); page says 80% left after 800. 126W max input per jackery.com; FAQ: 180W adapter, ~7.5 hr, 10.6 kg. Warranty 2+1 (if registered).
Specs from Jackery's published documents, as of September 2026. Found an error? Tell us.
Sources
Similar power stations
- Explorer 1000 vs Goal Zero Yeti 1000
- Explorer 1000 vs EcoFlow DELTA 3
- Explorer 1000 vs EcoFlow DELTA 3 Plus
- Explorer 1000 vs BLUETTI Elite 100 V2
- Explorer 1000 vs Anker SOLIX C1000 Gen 2
- Explorer 1000 vs DJI Power 1000