Goal Zero Yeti 700: Runtime & Specs
The Goal Zero Yeti 700 is a 677 Wh LiFePO4 power station with 600 W of continuous AC output and a 1,000 W surge rating.
We may earn a commission if you buy through these links. It never changes our numbers, and every model in our database is included whether or not it pays us. Learn more.
How long will the Yeti 700 run your appliances?
Nonstop runtime for one device at a time, using typical US wattages and 85% inverter efficiency. Devices marked ✕ can't run on this model.
| Device | Avg draw | Runtime | Bar |
|---|---|---|---|
| LED light bulb | 9 W | 2.7 days | |
| Phone charging | 10 W | 2.5 days | |
| Wi-Fi router + modem | 15 W | 38 hours | |
| Laptop | 50 W | 12 hours | |
| CPAP + humidifier | 30 W | 19 hours | |
| CPAP with heated humidifier + humidifier | 60 W | 9.6 hours | |
| Starlink Standard | 90 W | 6.4 hours | |
| TV | 100 W | 5.8 hours | |
| Mini fridge | 29 W | 20 hours | |
| Refrigerator | 58 W | Can’t start it | |
| Chest freezer | 29 W | 20 hours | |
| Sump pump (1/3 HP) | 160 W | Too much power | |
| Sump pump (1/2 HP) | 210 W | Too much power | |
| Window AC | 225 W | Can’t start it | |
| Drip coffee maker | 1,000 W | Too much power | |
| Microwave | 1,500 W | Too much power | |
| Space heater | 750 W | Too much power | |
| Well pump | 33 W | Needs 240 V |
Fridges, freezers, pumps and AC units cycle on and off, so we use their average draw. Want a mix of devices on a schedule? Use the runtime calculator.
What the Yeti 700 can't power
- Refrigerator (full-size, ENERGY STAR): needs about 1,200 W to start
- Refrigerator (older full-size, 1990s–early 2000s): needs about 1,600 W to start
- Microwave (1,000 W cooking power): needs 1,500 W running
- Drip coffee maker (10–12 cup): needs 1,000 W running
- Electric kettle (1.7 L): needs 1,500 W running
- Toaster (2–4 slice): needs 1,000 W running
- Induction burner (single, portable): needs 1,500 W running
- Electric pressure cooker (6 qt, Instant Pot type): needs 1,000 W running
- Window AC (5,000 BTU): needs about 1,100 W to start
- Window AC (8,000 BTU): needs 700 W running
- Space heater (portable, 1,500 W): needs 1,500 W running
- Gas furnace blower fan: needs about 1,400 W to start
- Sump pump (1/3 HP): needs 800 W running
- Sump pump (1/2 HP): needs 1,050 W running
- Well pump (1/2 HP submersible): needs 240 V
- Washing machine: needs about 1,200 W to start
- Garage door opener: needs 720 W running
- Circular saw (7-1/4 in.): needs 1,400 W running
- EV Level 1 charging (120 V, 12 A): needs 1,440 W running
Solar charging time
Hours of good sun to charge from empty, assuming panels deliver 75% of their rating.
| Panels | Power in | Hours of sun |
|---|---|---|
| 100 W of panels | 75 W | 9 hours |
| 200 W of panels | 150 W | 4.5 hours |
Check panel voltage and wiring with the solar charging calculator.
Full specifications
| Battery capacity | 677 Wh |
|---|---|
| Battery chemistry | LiFePO4 (LFP) |
| Continuous AC output | 600 W |
| Surge (peak) output | 1,000 W |
| Boost mode | None listed |
| AC voltage | 120V |
| AC outlets | 2 |
| USB-C ports | 3 (up to 100 W) |
| USB-A ports | 2 |
| 12 V car outlet | Yes |
| Max solar input | 200 W |
| Solar voltage range | 12.3–28 V |
| Solar max current | 10 A |
| Max AC charging power | 500 W |
| AC charging time (maker claim) | 0–100% in 1.7 hr |
| Expandable | No |
| UPS / EPS switchover | Not listed |
| Cycle life | 4,000 cycles (to 80%) |
| Weight | 20.3 lb |
| Warranty | 5 years |
Notes: 677.37 Wh. Solar via 8mm input only. AC passthrough (APS) max 1140W, no switchover time published. 4000+ cycles to 80%. Not chainable. Year = goalzero.com listing date (Jan 2024).
Specs from Goal Zero's published documents, as of September 2026. Found an error? Tell us.
Sources
Similar power stations
- Yeti 700 vs Anker SOLIX C800 Plus
- Yeti 700 vs DJI Power 500
- Yeti 700 vs BLUETTI EB70S
- Yeti 700 vs EcoFlow RIVER 2 Pro